X Series E70 X5 3.0Si (N52K) OFFRD
34 41 220
Removing and installing/replacing all
handbrake shoes
Special tools required:
•
34 4 000
Installation:
•
Remove rear brake disc
•
Release electromechanical parking brake (EMF)
After completing tasks, adjust handbrake
Disconnect return springs (1) with brake spring pliers.
Installation:
Check return springs (1) and replace if necessary.
Return springs (1) must not be mixed up.
Pay attention to installation position of adjustment screw (2).
Apply a thin coat of grease to bush and screw threads,
Refer to BMW Service Operating Fluids.
Note:
Illustration does not show wheel hub.
Turn clamping pins (1) with special tool 34 4 000 through 90
°
and disconnect.
Remove brake shoes (2).
RA Removing and installing/replacing all handbrake shoes
BMW AG - TIS
06.02.2013 19:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -