X Series E70 X5 3.0Si (N52K) OFFRD
41 11 015
Replacing engine carrier with wheel arch, left
Read contents of Body, General.
For stripping and rigging operations, refer to texts on KSD
CD (FR number 41 11 015).
The steel-aluminium mixed construction is used on the vehicle.
Observe specific procedure.
Remove or cover those vehicle components in the repair area
which are susceptible to heat or dust.
Use only approved spot-welding apparatus for repairs.
Place vehicle on straightening bench.
Following new body parts are required (refer to Electronic Parts
Catalogue ETK):
-
(1) Wheel arch, front
-
(2) Engine carrier
-
(3) Support, wheel arch
-
(4) Reinforcement, support carrier
Open weld joints in area (1).
Mark severance cut in accordance with measurement a and cut
support carrier.
Measurement a=50 mm before 20 mm dia. bore
Open weld joints in area (1).
Installation:
Weld in reinforcement plate at severance cut.
RA Replacing engine carrier with wheel arch, left
BMW AG - TIS
06.02.2013 21:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
