X Series E70 X5 3.0Si (N52K) OFFRD
51 47 030
Removing and installing/replacing rear
(inside) left or right entrance cover strip
Special tools required:
•
00 9 317
Version without 3rd seat row:
Detach mucket (1) in area of entrance cover strip (2).
Release entrance cover strip (2) at retainer (3) and clips (4)
towards top.
Installation:
If necessary, replace faulty retainer (3).
If necessary, release clips (4) from vehicle.
Installation:
Lug (1) must not be damaged or missing.
If necessary, replace faulty clips (2).
Fit missing clips on entrance cover strip (3).
Fit entrance cover strip (3) with preinstalled clips (2).
Version with 3rd seat row:
Detach mucket (1) in area of entrance cover strip (2).
Release entrance cover strip (2) at retainer (3) and clips (4)
towards top.
Installation:
If necessary, replace faulty retainer (3).
If necessary, release clips (4) from vehicle.
RA Removing and installing/replacing rear (inside) left or right entrance cover str
BMW AG - TIS
06.02.2013 23:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -