X Series E70 X5 3.0Si (N52K) OFFRD
61 31 172
Removing and installing/replacing switch for
electromechanical parking brake
Necessary preliminary tasks:
•
Remove knob for controller
•
Remove centre console trim
Important!
Risk of damage!
Install knob for controller only when controller is installed.
Release screws (1).
Unclip parking brake with trim (2) towards top.
Disconnect plug connection (1).
Release screws (2).
Remove parking brake button (3) from trim.
RA Removing and installing/replacing switch for electromechanical parking brake
BMW AG - TIS
07.02.2013 02:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
