X Series E70 X5 4.8i (N62TU) OFFRD
12 13 511
Replacing ignition coil (N62TU)
Necessary preliminary tasks:
•
Switch off ignition
•
Remove intake filter housing
Release screws and remove holder (1).
Pull ignition coil covers (2) out of rubber grommets.
Unlock plug fastener (1) of ignition coil.
Detach ignition coil connector in direction of arrow.
Pull out ignition coil (2).
This procedure is applicable to all ignition coils.
RA Replacing ignition coil (N62TU)
BMW AG - TIS
07.02.2013 23:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
