X Series E70 X5 4.8i (N62TU) OFFRD
Note:
A gasket (2) is installed between cylinder head and slide rail (1).
Replace gasket (2) and preinstall on slide rail (1).
Install slide rail (1) with gasket, insert screw and tighten down.
Rotate exhaust camshaft against direction of rotation until cam on
5th cylinder points upwards at an angle as shown in illustration.
Install inlet and exhaust adjustment unit on left side.
Install spark plugs on cylinder bank 5 to 8.
Install left cylinder head cover.
Install ignition coils on cylinder bank 5 to 8.
Assemble engine.
RA Removing and installing/replacing left exhaust camshaft (N62/N62TU)
BMW AG - TIS
07.02.2013 23:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -