X Series E70 X5 4.8i (N62TU) OFFRD
12 90 ...
Removing and installing/replacing electronics
box
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Note:
Follow instructions for removing and installing electronic control
units
Necessary preliminary tasks:
•
Read fault memory.
•
Disconnect negative battery cable
•
Remove electronics box fan
•
Remove distribution box (passenger compartment)
•
Release control unit holder
Pull rubber grommets out of electronics box. Disconnect all plug
connections.
Release screws (arrows).
Disconnect wiring harness on engine compartment side on right.
Remove electronics box.
RA Removing and installing/replacing electronics box
BMW AG - TIS
08.02.2013 00:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
