X Series E70 X5 4.8i (N62TU) OFFRD
12 14 521
Replacing crankshaft pulse generator (N62,
N62TU)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit; if necessary,
work through test schedules
•
Switch off ignition
•
If necessary, remove underbody protection.
Installation location:
On transmission housing at bottom right.
Unlock plug (1) and remove.
Release screw.
Withdraw pulse generator (2) from transmission housing.
Installation:
Replace sealing ring.
Replace screw.
Installation:
Now clear the fault memory.
RA Replacing crankshaft pulse generator (N62, N62TU)
BMW AG - TIS
08.02.2013 00:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
