X Series E70 X5 4.8i (N62TU) OFFRD
12 14 526
Replacing pulse generator on right inlet
camshaft (N62TU)
(cylinder bank 1 to 4)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit; if necessary,
work through test schedules
•
Switch off ignition
•
Remove intake filter housing
Release screws and remove holder (1).
Remove right ignition coil cover (2).
Release plug connector (1) and pull off.
RA Replacing pulse generator on right inlet camshaft (N62TU)
BMW AG - TIS
08.02.2013 00:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
