X Series E70 X5 4.8i (N62TU) OFFRD
12 42 500
Removing and installing or replacing battery
positive lead (between alternator, starter
motor and jump start connection point)
(N62TU)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit; if necessary,
work through test schedules
•
Switch off ignition
•
Disconnect battery negative lead
•
Remove intake hose
•
Remove intake filter housing
•
Remove intake air manifold
Open cover.
Release nut and disconnect battery positive lead from jump start
connection point.
Tightening torque 12 42 3AZ
.
Work step
Note:
Detach battery positive lead from alternator
Remove alternator
Detach battery positive lead from starter motor
Remove starter motor
Unclip and remove battery positive lead
RA Removing and installing or replacing battery positive lead (between alternator,
BMW AG - TIS
08.02.2013 00:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -