X Series E70 X5 4.8i (N62TU) OFFRD
12 61 280
Removing and installing/replacing oil
pressure switch (N62TU)
Warning!
Scalding hazard!
Only perform this task on an engine that has cooled down.
Necessary preliminary tasks:
•
Switch off ignition
Installation location:
Cylinder bank 1 to 4 on cylinder head, front right.
Removing left and right intake ducts:
Lever out expansion rivets (1).
Press lock (2) and raise intake duct (3).
Detach intake duct (3) from air filter housing and remove.
Note:
Illustration shows and text refers to the left intake duct. The
procedure is identical for the right intake duct.
RA Removing and installing/replacing oil pressure switch (N62TU)
BMW AG - TIS
08.02.2013 00:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
