X Series E70 X5 4.8i (N62TU) OFFRD
13 53 240
Replacing complete fuel rail (N62TU)
Special tools required:
•
13 5 281
Necessary preliminary tasks:
•
Read out fault memory of DME control unit; if necessary,
work through test schedules
•
Switch off ignition
•
Remove intake filter housing
•
Remove intake hose
Release screws and remove holder (1).
Remove ignition coil covers (2).
Unlock and disconnect following plug connections.
-
Fuel rail, left and right, on cable duct
-
Pulse generator on left exhaust and inlet camshafts
-
Left eccentric shaft sensor
-
Tank venting valve
-
Alternator
-
Throttle-valve assembly
-
All solenoid valves
-
Both temperature sensors
-
Oil-pressure switch
RA Replacing complete fuel rail (N62TU)
BMW AG - TIS
08.02.2013 01:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
