X Series E70 X5 4.8i (N62TU) OFFRD
13 62 560
Removing and installing/replacing air-mass
flow sensor (N62TU)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit; if necessary,
work through test schedules
•
Switch off ignition
•
Remove intake hose
Unlock plug (1) and remove.
Release screws.
Remove air-mass flow sensor (2).
Installation:
Check sealing ring between air-mass flow sensor and intake filter
housing for damage, replace if necessary.
Note:
Check stored fault messages.
Now clear the fault memory.
RA Removing and installing/replacing air-mass flow sensor (N62TU)
BMW AG - TIS
08.02.2013 01:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -