X Series E70 X5 4.8i (N62TU) OFFRD
13 71 000
Removing and installing/replacing intake filter
housing (N62TU)
Necessary preliminary tasks:
•
Switch off ignition
Unclip cover (1) and remove.
Removing left and right intake ducts:
Lever out expansion rivets (1).
Press lock (2) and raise intake duct (3).
Detach intake duct (3) from air filter housing and remove.
Note:
Illustration shows and text refers to the left intake duct. The
procedure is identical for the right intake duct.
Unlock plug (1) and remove.
Release clamp (2) and detach air intake hose.
Detach intake ducts from intake filter housing (3).
Detach intake filter housing (3) from rubber mount and remove.
RA Removing and installing/replacing intake filter housing (N62TU)
BMW AG - TIS
08.02.2013 01:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
