bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

ABOUT US
6 RA Removing And Installing_replacing Power Steering Cooling Coil (N62TU_N52K_N54_M5 > < 5 RA Removing And Installing_replacing Engine Oil Cooler (N62TU, N54)

X Series E70 X5 4.8i (N62TU) OFFRD

Page 2
background image

Release screw.

Installation:

•

Replace sealing rings.

•

N62 tightening torque  17 22 4AZ

.

•

N54 tightening torque  17 21 4AZ

.

Detach oil line (1) from engine oil cooler flange. 

Catch and dispose of emerging fluid.

Unlock and disconnect holder (2).

Remove engine oil cooler (3).

Note:

After completing work, check engine oil level and top up if
necessary.

RA  Removing and installing/replacing engine oil cooler (N62TU, N54)

BMW AG - TIS

08.02.2013  01:36

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

6 RA Removing And Installing_replacing Power Steering Cooling Coil (N62TU_N52K_N54_M5 > < 5 RA Removing And Installing_replacing Engine Oil Cooler (N62TU, N54)