X Series E70 X5 4.8i (N62TU) OFFRD
Necessary preliminary tasks:
•
Remove radiator air duct
•
Remove fan cowl
•
After completing this operation, check fluid level in tank of
power steering system.
Press lines (1) in direction of cooling coil (2). Pull locking ring
towards rear and keep pressed.
Detach lines (1) from cooling coil (2).
If necessary, use special tool 17 0 030 .
Important!
Catch and dispose of emerging fluid.
Release screws and detach side holder (1).
Tightening torque 17 10 1AZ
.
Feed out cooling coil (2) towards front and remove.
RA Removing and installing/replacing power steering cooling coil (N62TU/N52K/N54/M5
BMW AG - TIS
08.02.2013 01:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -