X Series E70 X5 4.8i (N62TU) OFFRD
Release screw.
Installation:
•
Replace sealing rings.
•
N62 tightening torque 17 22 4AZ
.
•
N54 tightening torque 17 21 4AZ
.
Detach oil line (1) from engine oil cooler flange.
Catch and dispose of emerging fluid.
Unlock and disconnect holder (2).
Remove engine oil cooler (3).
Note:
After completing work, check engine oil level and top up if
necessary.
RA Removing and installing/replacing engine oil cooler (N62TU, N54)
BMW AG - TIS
08.02.2013 01:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -