X Series E70 X5 4.8i (N62TU) OFFRD
Release and disconnect coolant hoses (1).
Release screw and remove lines (2).
Installation:
•
Replace sealing rings.
•
Tightening torque 17 22 1AZ
.
Release screws (3) and remove heat exchanger (4).
Installation:
•
Tightening torque 17 22 2AZ
.
Important!
Check fluid level in automatic transmission.
Refer to Maintenance and General Information MG00.
RA Removing and installing/replacing heat exchanger for automatic transmission (N62
BMW AG - TIS
08.02.2013 01:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -