X Series E70 X5 4.8i (N62TU) OFFRD
Cut both exhaust pipes at marked points with special tool
00 2 210 and deburr.
Secure exhaust system against falling off.
Release screws and remove holder (1).
Tightening torque 18 20 2AZ
.
Release screws and remove holder (1).
Tightening torque 18 20 3AZ
.
Note:
Texts refer to and illustrations show the left side. The procedure is
identical for the right side.
Lower and remove exhaust system with assistance of a second
person.
Installation:
Connect front muffler to rear muffler by means of clamps and
align.
Centre clamps and tighten down.
Tightening torque 18 20 5AZ
.
RA Replacing rear muffler (N62TU)
BMW AG - TIS
08.02.2013 01:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
