X Series E70 X5 4.8i (N62TU) OFFRD
Release screw (1).
Detach oil line (2) from front axle.
Release screw (1).
Disconnect hydraulic lines (2) to transmission fluid cooler.
Installation:
Replace sealing rings.
•
Unlock plug (1) by turning and disconnect
•
Release cable from retainers
•
Insert special tool 24 2 390 in sealing sleeve
These tasks are described in Notes on mechatronics.
(Important: Observe important note)
Release screw (1) and remove crankshaft sensor.
RA Removing and installing automatic transmission (GA6HP26Z) N62TU
BMW AG - TIS
08.02.2013 02:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
