X Series E70 X5 4.8i (N62TU) OFFRD
Crank engine at vibration damper in direction of rotation until
screw is visible in opening.
Release all screws of torque converter with special tool
24 1 110 .
Crank engine further and release remaining 3 bolts.
Tightening torque 24 40 1AZ
.
Prepare special tool (1) 24 4 161 (A) with shaped section (2)
24 4 165 side (A) to (A).
Insert special tool 24 4 160 into opening of transmission
housing and tensions slightly with screw (1).
Raise by turning screw (2) and clamp down.
Then tighten down screw (1).
Release screws.
Tightening torque, 24 00 1AZ
.
Unflange transmission.
RA Removing and installing automatic transmission (GA6HP26Z) N62TU
BMW AG - TIS
08.02.2013 02:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -