X Series E70 X5 4.8i (N62TU) OFFRD
31 53 040
Removing and installing/replacing right
output shaft bearing block
Warning!
N62, N63:
Danger of explosion!
There is a danger of short circuiting on account of the small
distance between the bearing block screw connection and the
starter motor.
Disconnect battery negative lead.
Necessary preliminary tasks:
•
Remove right output shaft
Release screws (1).
Remove bearing block from oil sump.
Installation:
Replace O-ring.
Tightening torque 31 60 1AZ
.
Replacement:
•
Remove sealing caps
RA Removing and installing/replacing right output shaft bearing block
BMW AG - TIS
08.02.2013 03:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -