X Series E70 X5 4.8i (N62TU) OFFRD
32 00 150
KDS chassis/wheel alignment check with load
up to design position
Important!
Carry out chassis/wheel alignment with DIN load only:
A) If the technical preconditions for alignment with ride
height input are not in place
B) If, in spite of repairs having been carried out, the car's
ride height between the left and right sides is still outside
the tolerance
C) If the vehicles in question have been involved in an
accident
Note:
Calibrate reversing camera after chassis/wheel alignment.
Note:
•
Read and comply with General information and definitions.
•
Read and comply with General chassis definition.
•
If necessary, prepare lifting platform.
•
Drive vehicle onto lifting platform.
Note: The front and rear wheels must be positioned centrally
on the rotary and sliding plates.
•
Remove locking pins from both rotary and sliding plates.
RA KDS chassis/wheel alignment check with load up to design position
BMW AG - TIS
08.02.2013 03:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
