X Series E70 X5 4.8i (N62TU) OFFRD
32 00 601
Adjusting toe-in on front axle
Note:
Camber and toe-in influence each other. Adjust the toe-in first in
order to simplify the adjustment procedure.
Version with active front steering:
-
Align steering wheel
-
Set cumulative steering angle by means of the service
function "Carry out initial operation/adjustment for active front
steering" to "zero".
-
If necessary, secure with steering wheel arrester
Version without active front steering:
If necessary, remove steering gear cover at top.
Move steering into straight-ahead position by means of markings
on cap (1) and steering gear (2).
Align steering wheel and secure with steering wheel arrester.
Clean thread on tie rod.
Slacken clamping nut (2), gripping tie rod end (1) in the process.
Remove clamp (4).
Turn tie rod (3) to adjust toe-in to specified value.
Version with active front steering: Check cumulative steering
angle; if necessary, set to "zero".
Check toe values, repeat adjustment if necessary.
Tighten down clamping nut (2).
Tightening torque 32 21 2AZ
.
Fit clamp (4).
RA Adjusting toe-in on front axle
BMW AG - TIS
08.02.2013 03:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -