X Series E70 X5 4.8i (N62TU) OFFRD
Important!
Installation protective ring must not slip out of shaft seal!
Coat housing plate flange of shaft seal with approved rear
differential oil.
Drive in shaft seal as far as it will go with following special tool(s)
(depending on rear differential /outside diameter).
33 5 130 : 188K/L/LW - 90x44x10
33 5 140 : 215L/LW - 100x50x10
Carefully remove special tool.
Open installation protective ring (1).
After installation:
•
Check rear differential oil level, correct if necessary
RA Replacing shaft seal(s) for output shaft(s), rear axle differential
BMW AG - TIS
08.02.2013 04:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
