X Series E70 X5 4.8i (N62TU) OFFRD
Support wheel carrier with workshop jack.
Release nuts (1, 2) and remove screw (3).
Remove rear shock absorber from swinging arm .
Unscrew nut (1).
Remove bolt (2) towards rear.
Installation:
Replace self-locking nut.
Tightening torque 33 32 3AZ
.
Release nut (1), remove eccentric washer (2) and pull out
eccentric screw (3) towards front.
Installation:
Note insertion direction of eccentric screw.
Align eccentric screw by means of marking to rear axle carrier.
Refit eccentric washer.
Replace self-locking nut.
Tighten bolt connection in normal position.
Tightening torque 33 32 2AZ
.
Release screw (4) and remove locking nut (5).
Installation:
Replace locking nut.
Tighten bolt connection in normal position.
Tightening torque 33 32 1AZ
.
RA Removing and installing/replacing left or right swinging arm
BMW AG - TIS
08.02.2013 04:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -