X Series E70 X5 4.8i (N62TU) OFFRD
33 32 153
Removing and installing/replacing front
compression strut
Important!
Observe safety instructions for raising the vehicle
Driving without compression struts is not permitted!
Necessary preliminary tasks:
•
Remove underbody panelling (rear section)
Release screws (1).
Tightening torque 33 33 2AZ
.
Release screw (3).
Tightening torque 33 33 2AZ
.
Release screw (2) and remove compression strut (4).
Secure rear axle carrier by inserting screw (2).
Installation:
Check threads for damage; if necessary, repair with Helicoil thread
inserts.
Tightening torque 33 33 1AZ
.
RA Removing and installing/replacing front compression strut
BMW AG - TIS
08.02.2013 04:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
