X Series E70 X5 4.8i (N62TU) OFFRD
Important!
Make sure spring pad is correctly installed in order to prevent
the coil spring from jumping out.
Install upper spring pad (1) in locator or frame side member and
turn clockwise as far as it will go.
Important!
Make sure coil spring is correctly seated in spring pads.
Insert coil spring with spring tensioner 33 5 100 between upper
and lower spring pads and relieve tension.
Relieve tension on spring tensioner 33 5 100 and remove.
After installation:
•
Check headlight adjustment, correct if necessary
RA Removing and installing / replacing rear left or right coil spring
BMW AG - TIS
08.02.2013 04:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
