X Series E70 X5 4.8i (N62TU) OFFRD
Important!
To release brake disc: Do not under any circumstances strike
friction ring with a hammer or similar!
If necessary, carefully tap on base of brake disc chamber with
a rubber mallet.
Clean contact surface of brake disc at wheel hub thoroughly
and remove traces of corrosion.
Unevenness on contact surface may result in distortion of
brake disc!
Release screw (1) and remove brake disc (2).
Installation:
Replace screw.
Tightening torque 34 21 1AZ
.
RA Removing and installing or replacing both rear brake discs
BMW AG - TIS
08.02.2013 04:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
