X Series E70 X5 4.8i (N62TU) OFFRD
35 11 000
Removing and installing (replacing) complete
bearing block for foot pedal
Important!
After completion of work, carry out function check.
Necessary preliminary tasks:
•
Remove pedal trim
Release screws (1).
Remove air duct (2).
Disconnect plug connection (1).
Remove locking clip (2) and pull out locking pin in direction of
arrow.
Unscrew nuts (1).
Installation:
Replace self-locking nuts.
Tighten nuts (1) such that bearing block can still be moved.
Make sure bearing block is correctly seated on body.
Tighten nuts (1).
Tightening torque 35 11 1AZ
.
RA Removing and installing (replacing) complete bearing block for foot pedal
BMW AG - TIS
08.02.2013 05:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -