X Series E70 X5 4.8i (N62TU) OFFRD
37 14 055
Removing and installing/replacing DYNAMIC
DRIVE control unit
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove side cover on instrument panel
Disconnect plug connection (1).
Release screw (2).
Tightening torque 37 14 8AZ
.
Remove Dynamic Drive control unit (3) from side.
Installation:
Insert control unit (1) with lug (2) into corresponding opening in
support tube. Engagement stud (3) must rest correctly in opening
of lug (2).
RA Removing and installing/replacing DYNAMIC DRIVE control unit
BMW AG - TIS
08.02.2013 06:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
