X Series E70 X5 4.8i (N62TU) OFFRD
37 15 ...
Removing and installing/replacing control
unit for vertical dynamics management
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove ignition key
•
Disconnect battery negative lead
•
Remove flap in luggage compartment panel on right
Lift back insulating mat (1).
Disconnect plug connection (1).
Unlock catches (2) and remove control unit (3).
RA Removing and installing/replacing control unit for vertical dynamics management
BMW AG - TIS
08.02.2013 06:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
