bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Troubleshooting On Dynamic Drive (ARS)|Page 1530 > < 1 RA Troubleshooting On Dynamic Drive (ARS)
Page 2
background image

Rattling noises
during excitation
provided by road
surface and
straight-ahead
driving (without
altering steering
wheel position)
and
Noises occur to a
large extent
independently of
temperature
influences

Screw connections on front
axle/rear axle loose

Refer to Troubleshooting front axle/rear axle

Stabilizer link
loose/defective

1. Check stabilizer link joints for damage; if necessary, replace 
stabilizer link
2. Tighten down screw connections to torque

Stabilizer screw connection
loose

Tighten down screw connections as specified in repair
instruction

Hydraulic lines installed
distorted

1. Check whether hydraulic lines are installed in holders
twisted (when system is depressurized, hydraulic lines must be
guided in holders virtually without elastic distortion of
decoupling elements)
2. Align all hydraulic lines for Dynamic Drive as specified in 
repair instruction

Hydraulic lines fitted too
closely or have insufficient
clearance (elastic
movement of line during
pressure build-up)

1. Check whether hydraulic lines are fitted too closely or have
insufficient clearance (for minimum clearance, see repair
instruction)
2. Align all hydraulic lines for Dynamic Drive as specified in 
repair instruction

Line holders loose

1. Check whether line holders are correctly screwed and
holder halves are correctly engaged
2. Fit all line holders as specified in repair instruction

Decoupling elements of
hydraulic lines must not be
damaged or missing

1. Check whether decoupling elements (rubber) are present
and correctly fitted or damaged
2. Replace or fit decoupling elements

Decoupling elements of
valve block holder damaged
or missing

1. Check whether decoupling elements (rubber) are present
and correctly fitted or damaged
2. Replace valve block

Line holders on hydraulic
lines missing or fitted in
incorrect position

1. Check whether line holders are present and fitted in correct
position
2. Fit all line holders as specified in repair instruction

Rattling noises
during excitation
provided by road
surface and
straight-ahead
driving (without
altering steering
wheel position)

RA  Troubleshooting on Dynamic Drive (ARS)

BMW AG - TIS

08.02.2013  06:15

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

1 RA Troubleshooting On Dynamic Drive (ARS)|Page 1530 > < 1 RA Troubleshooting On Dynamic Drive (ARS)