X Series E70 X5 4.8i (N62TU) OFFRD
41 12 535
Replacing complete rear luggage
compartment floor (tail panel removed)
Read contents of Body, General.
For stripping and rigging operations, refer to texts on KSD
CD (FR number 41 12 535).
Remove or cover those vehicle components in the repair area
which are susceptible to heat or dust.
Spot-weld bonding is used on this vehicle. Observe specific
procedure.
Use only approved spot-welding apparatus for repairs!
Place vehicle on straightening bench.
Following new body parts are required (refer to Electronic Parts
Catalogue ETK):
-
(1) Wheel arch, rear left and right
-
(2) Side member, rear left and right
-
(3) Side member, top left and right
-
(4) Luggage compartment floor
Carry over the work step shown symmetrically to the other side of
the vehicle.
Open weld joints in area (1).
Carry over the work step shown symmetrically to the other side of
the vehicle.
Open weld joints in area (1).
RA Replacing complete rear luggage compartment floor (tail panel removed)
BMW AG - TIS
08.02.2013 06:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
