X Series E70 X5 4.8i (N62TU) OFFRD
Remove cavity acoustic baffle.
Mark severance cut in accordance with specified measurement
and cut.
Measurement = 20 mm distance from radius
Cut wheel arch along line (1).
Open weld joints in area (2).
Installation:
Weld new part in area (3) overlapping with wheel arch.
Preparation of new part:
Mark new part in accordance with severance cut on vehicle +
20 mm extra material and cut (1).
RA Replacing rear left outer wheel arch section (rear left side panel removed)
BMW AG - TIS
08.02.2013 06:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
