X Series E70 X5 4.8i (N62TU) OFFRD
51 12 157
Replacing rear bumper trim
Necessary preliminary tasks:
•
Remove rear bumper trim
Version with Park Distance Control (PDC):
Remove ultrasonic transducer.
Unclip wiring harness (1) at points (2).
Installation:
Check wiring harness for damage, replace if necessary.
Make sure wiring harness is correctly seated.
Note:
Depending on engine version, install thermal protection (1).
Attach thermal protection (1) to bumper trim (2) and secure with
retainers (3).
RA Replacing rear bumper trim
BMW AG - TIS
08.02.2013 07:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
