X Series E70 X5 4.8i (N62TU) OFFRD
Installation:
Following parts of trim strip (3) must not be damaged or missing:
1
Seals
2
End piece, front/rear
Replacement:
Moisten seals (1) with water and slide into trim strip (3).
Fit end pieces (2) at front and rear.
Installation:
E83 only: Push trim strip (2) at front into seal (1).
Trim strip (2) must be flush with edge (3) at rear.
Clip trim strip (2) into place completely.
RA Removing and installing/replacing trim strip on roof frame at left or right
BMW AG - TIS
08.02.2013 07:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -