bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

20 RA Removing And Installing Complete Centre Console|Page 1817 > < 19 RA Removing And Installing_replacing Rear Centre Console Trim
Page 1
background image

51 16 165

Removing and installing complete centre
console

Necessary preliminary tasks:

Remove gear selector switch carrier

Remove fresh air grille in rear compartment

Remove trim for AV socket 

 

Note:

For purposes of clarity, operation is described on removed driver's
seat.

Release screws (1) on left/right.

Release screw (1) and pull centre console (2) towards rear
slightly.

Version with rear compartment monitor:

Disconnect plug connection (3).

Pull out air duct (1).

Release cable holder for cable (2) from center console (3).

Installation:

Make sure air duct (1) is correctly seated on centre console (3).

RA  Removing and installing complete centre console

BMW AG - TIS

08.02.2013  07:57

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

20 RA Removing And Installing Complete Centre Console|Page 1817 > < 19 RA Removing And Installing_replacing Rear Centre Console Trim