X Series E70 X5 4.8i (N62TU) OFFRD
51 22 170
Removing and installing/replacing outside
handle on left or right back door
Necessary preliminary tasks:
•
Remove cover on outside handle
If necessary, lay outside door handle light (1) slightly to one side.
Pull out outside handle (2) and feed out in direction of arrow.
Version with Comfort Access/CA:
Carefully feed out outside handle (2) and disconnect associated
plug connection.
Installation:
Locator (1) must not be damaged.
Version with Comfort Access/CA:
Seal (2) must not be damaged.
Installation:
Seals (1 and 2) must not be damaged.
If necessary, pull lock actuator (3) outwards until it engages
retaining clasp (4).
Install outside handle and insert correctly into lock actuator (3).
Outside handle is in the correct position only after the cover has
been fitted on the outside handle.
Carry out function check only with door open.
RA Removing and installing/replacing outside handle on left or right back door
BMW AG - TIS
08.02.2013 08:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -