X Series E70 X5 4.8i (N62TU) OFFRD
51 23 100
Removing and installing/replacing right
engine hood/bonnet lock
Unclip coupling (1) from side panel.
Lever out cover (2) at coupling (1).
Lever Bowden cable (3) out of coupling (1).
Unclip Bowden cable (1) from holder (2).
Note:
Illustration shows A/C lines and module carrier cover removed for
purposes of clarity.
Release screws (1).
Tightening torque 51 23 2AZ
.
Feed out hood/bonnet lock (2) through opening (3).
Disconnect plug connection (1), unclip plug and cable from body.
Disengage Bowden cable (1) in direction of arrow from
hood/bonnet lock (3).
Replacement:
Remove switch (4) .
RA Removing and installing/replacing right engine hood/bonnet lock
BMW AG - TIS
08.02.2013 08:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
