X Series E70 X5 4.8i (N62TU) OFFRD
51 24 280
Removing and installing/replacing bottom left
or right lock support for rear lid
Necessary preliminary tasks:
•
Remove trim on D-pillar at bottom
Open rear lid (1) only until screw (2) is accessible (risk of injury
by spring tension).
Release screw (2) with rear lid in this position.
Tightening torque 51 24 7AZ
.
Release screw (1) and remove support (2).
Tightening torque 51 24 7AZ
.
RA Removing and installing/replacing bottom left or right lock support for rear lid
BMW AG - TIS
08.02.2013 08:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
