X Series E70 X5 4.8i (N62TU) OFFRD
51 24 080
Removing and installing/replacing drive for
rear lid lock
Necessary preliminary tasks:
•
Remove trim for rear lid lower section
Lever out cover (1), release screw underneath and remove
handle (2).
Lever out cover (3) and release screw underneath.
Installation:
If necessary, replace faulty drives (1 and 2).
Disconnect Bowden cable (1 and 2).
Release screws (1) and feed out drive (2).
Tightening torque 51 24 6AZ
.
RA Removing and installing/replacing drive for rear lid lock
BMW AG - TIS
08.02.2013 08:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
