bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing Left Or Right Rear Door Trim Panel|Page 1992 > < 3 RA Removing And Installing Left Or Right Rear Door Trim Panel
Page 2
background image

Unclip door trim panel (1) at clips (2) with special tool 
00 9 317 .

Carefully unclip door trim panel (1) at top from retainers (2).

Disconnect all plug connections.

Unhook Bowden cable (1) from door lock (2).

Important!

After each removal, all light blue clips (2) must be replaced.

Installation:

If necessary, replace faulty clips (1).

Fit all clips with sealing ring.

Make sure clips are installed in correct position.

1

Grey clip

2

Light blue clip

RA  Removing and installing left or right rear door trim panel

BMW AG - TIS

08.02.2013  09:14

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

3 RA Removing And Installing Left Or Right Rear Door Trim Panel|Page 1992 > < 3 RA Removing And Installing Left Or Right Rear Door Trim Panel