X Series E70 X5 4.8i (N62TU) OFFRD
Using special tool 00 9 317 , raise trim panel (1) slightly and
unclip from retainer (3).
Pull entrance cover strip (4) in direction of arrow out of clip (2).
Installation:
If necessary, replace faulty retainer (3).
Installation:
Lug (1) must not be damaged or missing.
If necessary, replace faulty clips (2).
Fit missing clips on entrance cover strip (3).
Fit entrance cover strip (3) with preinstalled clips (2).
RA Removing and installing/replacing rear (inside) left or right entrance cover str
BMW AG - TIS
08.02.2013 09:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -