bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing_replacing (upper) Panel For Rear Window Frame > < 3 RA Removing And Installing_replacing Sound Insulation On Left Or Right Rear Door|Page 2062
Page 1
background image

51 49 000

Removing and installing/replacing panel for
rear lid

Necessary preliminary tasks:

Remove trim for rear window frame on left/right

Remove luggage compartment lights on rear lid

Release screws (1) in recessed handle.

Feed back handle (2) of emergency unlocking.

Release panels (3) at clips (4) and remove.

Installation:

If necessary, replace faulty clips (1 and 2).

Make sure all clips are installed in correct position.

(1)

Grey clip

(2)

White clip

RA  Removing and installing/replacing panel for rear lid

BMW AG - TIS

08.02.2013  09:51

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Removing And Installing_replacing (upper) Panel For Rear Window Frame > < 3 RA Removing And Installing_replacing Sound Insulation On Left Or Right Rear Door|Page 2062