X Series E70 X5 4.8i (N62TU) OFFRD
51 13 116
Removing and installing/replacing cowl panel
cover
Necessary preliminary tasks:
•
Remove both windscreen wiper arms
•
Remove both microfilter housing covers
Release clips (1).
Feed out cover (2) towards top.
Installation:
If necessary, replace faulty clips (1) and associated grommets in
body.
Installation:
Make sure grommets (1) are correctly seated on wiper pivots.
Grommets (1) for wiper pivots must not be damaged.
Installation:
Cowl panel cover (1) must be correctly guided on right and left
under windscreen cover (2).
RA Removing and installing/replacing cowl panel cover
BMW AG - TIS
08.02.2013 09:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -