X Series E70 X5 4.8i (N62TU) OFFRD
52 26 200
Removing and installing/replacing rear panel
on right rear seat back
Necessary preliminary tasks:
•
Lever welt of backrest cover out of backrest frame
Detach rear panel (2) with flat scraper (1) from rear seat back.
Installation:
Comply with instructions issued by manufacturer of universal
spray adhesive.
Apply universal spray adhesive to rear panel and rear seat back.
Fit and align rear panel within the air drying time (see
manufacturer's instructions).
Observe and adhere to curing time to prevent rear panels from
slipping.
RA Removing and installing/replacing rear panel on right rear seat back
BMW AG - TIS
08.02.2013 11:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -