X Series E70 X5 4.8i (N62TU) OFFRD
54 13 150
Removing and installing rear cross-member
Necessary preliminary tasks:
•
Remove glass slide/tilt sunroof
•
Remove drive
Release screws in marked area.
Tightening torque: 54 12 03AZ
.
Remove cross-member (1).
Installation:
Pitch cables must be correctly laid diagonally in guide.
RA Removing and installing rear cross-member
BMW AG - TIS
08.02.2013 12:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -