bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Replacing Battery Negative Lead > < 1 RA General Information On Intelligent Battery Sensor (IBS)
Page 1
background image

61 12 002

Replacing battery positive lead (from battery
to luggage compartment connector)

Warning!

Observe safety instructions for handling vehicle battery.

Notes and instructions on Intelligent Battery Sensor IBS.

 

Important!

Do not under any circumstances pull/lever safety battery
terminal off by force.

Necessary preliminary tasks:

Remove flap in luggage compartment panel on right

Disconnect negative battery cable

Disconnect plug connection (1) on safety battery terminal (2).

Open cover and release nut (3).

Tightening torque 61 21 2AZ

.

Open cover (2) and slacken nut underneath.

Tightening torque 61 21 1AZ

.

Using a screwdriver, expand locking bracket (6) at lower end and
clip out.

Raise distribution box slightly and remove safety battery terminal.

Open cover (1).

Slacken nut (2).

Tightening torque 61 12 3AZ

.

Disconnect battery positive lead.

RA  Replacing battery positive lead (from battery to luggage compartment connector)

BMW AG - TIS

08.02.2013  12:31

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Replacing Battery Negative Lead > < 1 RA General Information On Intelligent Battery Sensor (IBS)