X Series E70 X5 4.8i (N62TU) OFFRD
61 31 118
Removing and installing/replacing power
window switch (passenger side)
Special tools required:
•
00 9 317
Important!
Carry out the following operation carefully so as to avoid
damaging the door trim panel and switch.
If necessary, tape off working area.
Lever power window switch (1) with special tool 00 9 317 in
direction of arrow out of armrest.
Disconnect associated plug connection and remove power
window switch (1).
Installation:
Retaining hooks (1) of power window switch (2) must not be
damaged.
Make sure power window switch (2) is correctly seated in armrest.
RA Removing and installing/replacing power window switch (passenger side)
BMW AG - TIS
08.02.2013 13:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
